Welcome To Arrow Fletching Supplies

4" DURAVANES

Made with a blend of the strongest non–rubber materials available, DURAVANES have been designed and tested to outperform any other vane, in all aspects.

12 pack – $2.99

BOHNING 2" BLAZER VANES

A two inch vane great for use with fixed blade or mechanical broadheads. Helps eliminate interference problems and increases speed. Weighs only 6 grains.

36 pack – $9.99

BOHNING 2" TIGER BLAZER VANES

Colors (in order of image)

1. Neon Red Tiger
2. Hot Pink Tiger
3. White Tiger
4. Neon Orange Tiger
5. Neon Yellow Tiger
6. Green Tiger
7. Gun Metal Tiger

Available in 5 Neon colors, the Blazer Tiger vanes match the Tiger BlazerWraps pefectly. Provides a jaw dropping look with the added benefit of a natural camo. Available in 2" Blazer Only.

36 pack – $16.99

BOHNING 2" CAMO BLAZER VANES

Decorated in RealTree HardWoods camo, the Blazer and the 4" Killer vanes are the only "Exclusively Licensed" camo vanes on the market.

36 pack – $16.99

GATEWAY 4" RIGHT WING SHIELD CUT FEATHERS

Colors (in order of image)

1. Tre Bark
2. Tre Blue
3. Tre Brown (not available)
4. Tre Green (not available)
5. Tre Orange (not available)
6. Tre Purple
7. Tre Red
8. Tre Yellow (not available)
9. Barred Blue (not available)
10. Barred Chartreuse
11. Barred Desert Brown
12. Barred Orange (not available)
13. Barred Red
14. Barred White
15. Barred Yellow
16. Solid Black
17. Solid Chartreuse
18. Solid Denim Shield
19. Solid Desert Brown
20. Solid Flo Yellow
21. Solid Green
22. Solid Lemon Lime
23. Solid Orange
24. Solid Red
25. Solid Tangerine
26. Solid White
27. Solid Yellow

Gateway Feathers is the World Leader in the manufacture and distribution of quality archery feathers. They have been processing feathers for over 50 years. Their complete processes include washing, dying, drying, grinding the quills, die cutting, quality control and packaging. Gateway products are made from feathers hand selected in the United States.

1 Dz. Pk. – $6.99

BOHNING 4" BLAZER WRAPS

The Blazer Wrap is the perfect match for the Blazer broadhead vane, Dress up your hunting or target arrows for increased visibility and style. The Blazer Wrap is only four inches long and weighs five grains. All Tiger Blazer Wraps are now available in four widths to minimize overlap:

• 1"– Standard Carbon

Directions:

• Step 1) Clean all old adhesive from arrow shaft using alcohol or thinner.
• Step 2) Prep shaft surface using SSR, or an abrasive detergent. Shaft surface should appear dull, not shiny.
• Step 3) Remove wrap. Place wrap on a flat surface, adhesive side up.
• Step 4) Align shaft with edge of wrap and roll with steady motion and pressure.

1 DZ. Pk. – $17.99

BOHNING 7" ARROW WRAPS

Colors (in order of image)

1. Neon Orange
2. Neon Yellow
3. Hot Pink
4. Neon Green
5. Neon Red
6. White
7. Neon Yellow Airbrush
8. Neon Orange Airbrush
9. Orange Airbrush
10. Green Airbrush
11. Bohning Tiger
12. Stars and Stripes (Not Available)
13. Whitetail Hunter White
14. Whitetail Hunter Yellow
15. Bear Hunter
16. Bohning Logo (Not Available)
17. Zebra
18. Yellow Tiger
19. White Tiger
20. Orange Tiger
21. Birch

7" long wraps. Comes in Carbon (1") to minimize overlap. Helps you visually locate your shaft in flight or on the ground. Allows you to easily fletch with any fletching adhesive. Each package contains 12 ArroWraps. Made from seven year outdoor durable vinyl. Aluminum ArroWraps weight 10 grains (+/- .5 grain) Carbon 8 grains (+/- .5 grain)

Directions:

• Step 1) Clean all old adhesive from arrow shaft using alcohol or thinner.
• Step 2) Prep shaft surface using SSR, or an abrasive detergent. Shaft surface should appear dull, not shiny.
• Step 3) Remove wrap. Place wrap on a flat surface, adhesive side up.
• Step 4) Align shaft with edge of wrap and roll with steady motion and pressure.

1 Dz. Pk. – $17.99

BLAZER DOUBLE LOCK NOCK

A small, press fit nock designed for "D" loops. The Blazer nock has a double lock feature that is just tight enough to keep your shafts on your string without affecting its release when shot. Fits Easton Uni–Bushing system and standard carbon shafts. Incorporates an index and alignment feature and a nock recess. Made of durable, impact resistent Polycarbonate. One size fits all. Weighs 9 grains.

Available Colors:

1. Neon Green
2. Neon Yellow
3. Black
4. White
5. Rose
6. Lime

1/2 Dozen | $2.99

BOHNING FLETCH TITE PLATINUM GLUE

Provides an extremely tough, durable bond, remains flexible and water repellent. Platinum provides you with an incredible bond with cedar, fiberglass, aluminum, or carbon shafts. Available in 2 oz. tube

Directions for Fletching:

Apply thin bead to vane or feather base. Place fletching. Make sure base fully contacts shaft.

Directions for Nocks:

Apply small amount to nock. Install nock and rotate one full turn.

2 oz. – $4.99

GOAT–TUFF ADHESIVE GLUE

Goat Tuff Adhesive will glue inserts in graphite, carbon or aluminum shafts; broadheads onto aluminum ferrules; nocks and points on wood arrows. A little goes an extremely long way, 1/2 oz. bottle will glue approximately 12 to 15 dozen arrows.

Directions for Nocks and Inserts:

Apply small amount to nock or insert. Install nock or insert and rotate one full turn.

1/2 oz. – $9.99

BITZENBURGER JIGS

BITZENBURGER jigs have set the industry standard for fletching tools for over 50 years. It is todays only true precision fletching instrument used by every major manufacturer of quality arrows around the world. Unparalleled quality along with simplicity, design and precision sets this fletching tool in a class by itself. Designed by experienced archers for the perfectionist who wants the finest fletcher in the world for perfect arrow making.

Features:

• Constructed of die cast alloy, this self–supporting fletching tool features a strong permanent magnet which allows for very precise and uniform placement of all feathers and vanes.
• Self–centering shaft cradle will accept and center any size available today.
• Large dials at the top and bottom of the magnet holder make it easy to adjust your angle of fletching within seconds, to fletch straight, offset or true right or left helical.
• Feather spacing of 3 fletch 120 degrees, 4 fletch 75 degrees x 105 degrees, and 4 fletch 90 degrees can be selected by a slight screw adjustment. Optional nock receivers available to achieve 60 degrees x 120 degrees 4 fletch or 120 degrees 3 fletch cock vane down or up.
• All metal parts.
• Comes complete with wrenches and instruction sheet.

Right Wing – $84.99

BOHNING HELIX FLETCHING JIG

Blazer HELIX Fletching Jig! The only fletching jig with a Helical designed for 2" vanes.

The Blazer HELIX Fletching Jig, with a pre–set 3 degree helical built into the clamp, gives a real helical, not just an offset.

Right Wing – $44.99